High Speed Fuses - Square body DIN 43 620,690V (IEC),10-800A (Type T Indicator For Micro)

Square body DIN 43 620 blade style high speed fuses.

See dimensions illustration.

CE, Designed and tested to/IEC 60269: Part 4, UL Recognized.

@ Excellent dc performance
@ Low arc voltage and low energy let-through (I2t)
@ Low watts loss
@ Superior cycling capability

@ DC common bus
@ DC drives
@ Power converters/rectifiers
@ Reduced voltage starters

This curve gives the peak arc voltage, UL, which may appear across the fuse during its operation as a function of the applied working voltage Eg , (rms) at a power factor of 15%.

The total clearing I2t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K, given as a function of applied working voltage, Eg, (rms).

*The RMS amp rating of this fuse range is given with open fuse bases connected to copper conductors according to IEC 60269, Part 1, table 10. When used in enclosed fuse bases/disconnects, derating factors have to be observed. Please contact Cooper Bussmann for application assistance. @ Watts loss provided at rated current. @ Microswitch ordered separately.

Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, Kp, is given as a function of the RMS load current, Ib, in % of the rated current.